Just purchased a Nesika model C benchrest rifle chambered in 6PPC, what would be the best choice in a bore guide for this setup, don’t have rifle in hands yet as it’s being shipped. Didn’t know if the Nesika action required something special or if a standard Remington pattern bore guide would work. Thanks for any and all advice
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Nesika Model C bore guide
- Thread starter Gunnut26
- Start date
Steve Kostanich
Active member
Bore guide for a Rem 700 will work fine. I have a Nesika J , which is very similar to the C and I use a guide for the 700 in It. Just be sure to get the front O-ring size for a PPC chamber.
FWIW
Steve Kostanich
FWIW
Steve Kostanich
Thank you SteveBore guide for a Rem 700 will work fine. I have a Nesika J , which is very similar to the C and I use a guide for the 700 in It. Just be sure to get the front O-ring size for a PPC chamber.
FWIW
Steve Kostanich