Search results

one would think so.

just for outside the box, you might have some warpage in the stock. Only thinking this because you same things happening backasswards.

this is why backers are employed- tells if shot came from different bench or not. not critical in a club match if it left up to range officer. heck of an under current if a registered match. Depending on the type of match many ways of dealing with cross fires/ extra shots. as an RO & being on...

Need to resize the image or or send it as a thumbnail.,, then who ever wants to look at fullsize can bump it up from the thumbnail.

leupold used to make one for there scopes I got one around somewhere, I know it will go down to 50 ft.

according to some none of us are.

diving shop if you have one in in the area but those are only going to be likely under 3000 psi. there is a tme period for tanks_ expiration date_ I think 10 years from oem mfg date and then no one will fill them any more. They also have to be pressure tested every so often and there is a...

shortly after those ity bitty cars became available, I was at the grocery store and one pulled in , a man and woman got out , I simply could not believe it, both were every bit as large as the female above, No idea where they were going to put any groceries in there plus themselves,

in order to tig it all the braze material must be removed, otherwise the weld will be contaminated and likely would be weaker than the original brazing job.

assault jack

Never liked hammering anything out with a live primer/round. Particularly with a locked up bolt. Method i have used for eons involves bore sized tube a rod with a small drill bit brazed or welded on. Rod being smaller than tube id so a couple of centering slugs with a slot along length of...

My doc of many years , retired couple years back ( rats), was a Nam medic as a start in the field, he would use that same hurt line.

If the sear is following the bolt down you may have insufficient sear engagement. this could be caused by a wear factor , plus all the dirt statements above. 2-3 oz is very lite for a basics trigger.

I remember the controversy that those sporters caused.

go to task manager, find the running program and shut it down. That should solve things for you

i have a machine shop . my grinding wheels, vitrified, are now 3.5 times what they used to be. funny part is the diamond and cbn types have not changed much, maybe 5 %. Freight costs are a killer domestic and international.

I know costs have gone up . The other day I though I should see what might be around for the couple powders I use . Should have called the paramedics first. I now have CT and MRI scans at the end of the month.

PLEASE SEE BELOW https://benchrest.com/forum/forums/humor-section.61/

Well this a humor thread and all this bitching is quite entertaining. Although it is a pia to read and jump around to various ref. and I just wasted 20 minutes doing that. Jokes on me.

That's been going on for ever, the digital scan is the only new part.