Al Nyhus's latest activity

I have used a scope checker to verify POA issues with 40x and 45x LCS scopes. I used a trusted 36x Leupold as the "standard." The one...

Yes it is. It's a 22BR. -Al

With the trigger hanger, there's not a lot of room for a decent sized pillar for the tang screw. I made mine from a piece of 3/8"...

The coned bolt feeds like a real BR action. Kelbly's makes a .173 spacer that works with the Atlas .692 headspace and .250 recoil lug to...

Jim, We mourn the passing of a great man, a legend of the sport. I met George back in 1980, and he left a lifetime impression on me. My...

Is it a coned bolt or a flat bolt?

Mr. Kelbly was a true legend. That his legacy lives on with his family says a lot about him. 🙏

Just a follow up: I received a prompt response from Defiance, nothing from Long Rifles. I ordered Rem M700L and M700S 28# springs from...

Yowzer...that's two 409 cranks!

Keith's calls will be greatly missed. Surely, Keith rests in paradise. Thank you, Dave.

Pete, the point up die I mentioned is the die used in making the bullets. The after market dies sold for 'pointing' bullets are a...

Mike, that's some serious hardware! -Al

Pete, tell me more about your testing proceedure.

Many good posts about Keith above. Keith grew up on a farm about a half mile from the little town where I was raised. He was 4 years...

Good morning from sunny South Dakota. :) Having done blind testing with bullets having up to .015 base-to-ogive variances from the...