inletting a stock part 2....DROP PORT

[rsmithsr]

so this is a 6mm dasher drop port, borden brmxd .
so how big is the outlet in the bottom of the stock ?
just copy the action port
bigger than the port, how so ?
smaller than the action port ??

yes it is bedded..finally at last!!!

[R.G. Robinett]

For Stiller Diamondback Drop Port. An example of one type - the exit is just a round hole. RG

[rsmithsr]

i found pics of funnels...NONE IN STOCK
and cut based on the internal shape of those funnels
my action now drops a dasher case out the bottom.
some clean up and cosmetic work to do.

[mwezell]

i found pics of funnels...NONE IN STOCK
and cut based on the internal shape of those funnels
my action now drops a dasher case out the bottom.
some clean up and cosmetic work to do.

I ran into the same thing recently doing one for myself. The worst part is, I've got a spare here but couldn't put my hands on it. It makes the job much easier but it's not a necessity. I sloped the back side down but the front(toward bbl) is pretty much straight down with a 5/8" hole. I made a little bezel and blended it in with epoxy as best I could. Kinda hard to work sandpaper in that hole but it works fine. I'll try a pic in a minute and see if I can get it posted. It didn't have to be quite that big but it looks fine to me.

[rsmithsr]

yes i started with 1/2" and then opened a little.
after live fire testing will seal it all.

I ran into the same thing recently doing one for myself. The worst part is, I've got a spare here but couldn't put my hands on it. It makes the job much easier but it's not a necessity. I sloped the back side down but the front(toward bbl) is pretty much straight down with a 5/8" hole. I made a little bezel and blended it in with epoxy as best I could. Kinda hard to work sandpaper in that hole but it works fine. I'll try a pic in a minute and see if I can get it posted. It didn't have to be quite that big but it looks fine to me.

[mwezell]

Here's that pic I forgot to post.

[rsmithsr]

so in real life i had a couple of case not drop, the case mouth would hit/ding the stock foam just enough to stop it.
soo i made a kick plate. .032 al sheet rolled to just over 1/2 id and removed a little stock foam, stuck it in place and cycled some brass...100% drop.
think i will glue in place and see what happens

[Butch Lambert]

so in real life i had a couple of case not drop, the case mouth would hit/ding the stock foam just enough to stop it.
soo i made a kick plate. .032 al sheet rolled to just over 1/2 id and removed a little stock foam, stuck it in place and cycled some brass...100% drop.
think i will glue in place and see what happens

Your photos are clear as mud.

[rsmithsr]

i have no idea what is going on, but i can no longer post pic....the manage attachments button does nothing....others have posted a different screen than i get...no clue

[mwezell]

i have no idea what is going on, but i can no longer post pic....the manage attachments button does nothing....others have posted a different screen than i get...no clue

I'm not very computer savvy at all but I'd say it's your browser causing your trouble. Consult a 10 year old. Better than me trying to fix it.

[GeneT]

I'm not very computer savvy at all but I'd say it's your browser causing your trouble. Consult a 10 year old. Better than me trying to fix it.

The problem is that 10-year olds no longer know how to use computers. Unless there's an app for it on their phone, you're out of luck.

GsT

[mwezell]

The problem is that 10-year olds no longer know how to use computers. Unless there's an app for it on their phone, you're out of luck.

GsT

Lol! Yep, that sounds about right!

[rsmithsr]

so i tried another browser...it would not let me log in ...wtf ???

[brickeyee]

Just make sure it will eject a still loaded round.
That bullet out there can be annoying at times.

[Jerry W]

Just make sure it will eject a still loaded round.
That bullet out there can be annoying at times.

None of the drop ports that I've seen, including my Viper and a buddies Borden, will drop a loaded round. The cutout in the action is just long enough for the empty case.