Results 1 to 5 of 5

Thread: Need to rechamber

  1. #1
    Join Date
    Apr 2011
    Posts
    12

    Need to rechamber

    Guys who can chamber my Remington 22br to accept Papua brass thank youp

  2. #2
    Join Date
    Feb 2003
    Location
    Houston, Texas
    Posts
    8,075
    Quote Originally Posted by stratboy View Post
    Guys who can chamber my Remington 22br to accept Papua brass thank youp

    It sounds like you have a chamber that was reamed for the original Remington or Norma brass. Lapua is larger enough at the web to cause problems.

    You can actually ream it by hand if you have the reamer and are careful. I have done this to old Remington 6BR chambers that had the same problem.

    Have you considered renting a reamer and doing it yourself? If you say yes, I have a deal for you.

  3. #3
    Join Date
    Apr 2011
    Posts
    12
    Quote Originally Posted by jackie schmidt View Post
    It sounds like you have a chamber that was reamed for the original Remington or Norma brass. Lapua is larger enough at the web to cause problems.

    You can actually ream it by hand if you have the reamer and are careful. I have done this to old Remington 6BR chambers that had the same problem.

    Have you considered renting a reamer and doing it yourself? If you say yes, I have a deal for you.
    No I would need a pro thanks anyway

  4. #4
    Join Date
    Apr 2011
    Posts
    12
    Quote Originally Posted by stratboy View Post
    No I would need a pro thanks anyway
    Would norma brass be the same size as remington

  5. #5
    Join Date
    Feb 2003
    Location
    Houston, Texas
    Posts
    8,075
    Quote Originally Posted by stratboy View Post
    Would norma brass be the same size as remington
    Norma would probably chamber since it does run smaller at the web than Lapua.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •