Rem 700 S/A 7MM WSM
Sako extractor was already installed when I bought the gun
There is no problem at all with extraction, it pulls loaded and spent cartriges out with ease
When it comes time to flip the cartrige out of the ejection ort, the case falls back in on top of the other cases in the magazine, or on top of the follower.

There is a slight chip of material missing out of the "claw" portion of the extractor, perhaps 25% -30% of the claw is missing.

Yes, I have taken everything apart, cleaned, looked for burrs, lubed, and re-assembled.

Could this missing piece of the claw be the problem?