I like the idea. Ty. My 243 bushing should work with the 6.5 ? Have to try it. Using Redding Type S FL sizing bushing die.
The Redding standard die, 6.5 seating stem was contacting the...
Type: Posts; User: 243winxb; Keyword(s):
I like the idea. Ty. My 243 bushing should work with the 6.5 ? Have to try it. Using Redding Type S FL sizing bushing die.
The Redding standard die, 6.5 seating stem was contacting the...
Bare rifle $1200. With scope/mounts $1600. Retail. Must average 1/2" @100 yds or smaller.
At auction $500 with orginal wood stock, no scope, Douglas barreled.
...
Standard seating die, that can crimp while seating.
A ring of lead can be shaved from a 45 acp cast bullet when seating and crimping at the same time, if there is a die problem.
On rifle, move...
http://benchrest.com/showthread.php?82161-Sure-name-in-the-forum Ok. Joe Harris. ;)
Mine is 1970s single shot action 40x in 243 win.
My 1970s factory standard trigger is around 3 pounds. Single Shot 243 Win. Took a photo of my trigger. The instructions on adjusting is from the online manual i googled. ...
https://forum.accurateshooter.com/threads/remington-40-xb-h2.3998842/
And more https://forum.accurateshooter.com/threads/40x.4005075/
...
Oliver North was paid by the NRA IN 2018, $ 1,377,617. Not a bad pay day, while it lasted. https://apps.irs.gov/pub/epostcard/cor/530116130_201812_990O_2020020617115747.pdf
The NRA is running in the red. It may not be around much longer. When the NRA goes, so do the guns.
...
https://www.thehighroad.org/index.php?threads/nra-says-it%E2%80%99s-broke-and-on-the-verge-of-collapse.839730/page-4
Non profits have to file with IRS. Its public info. ...
The 223 if a fun gun and cheap to shoot. One day i may invest in some Berger Bullets.
Leave everything else alone & test fire a few rounds.
10 rounds into an inch at 100 yards without much effort on my part. ( I did it twice)
For $1200, buy it. But check to see if the twist rate is what you need for bullets you want to use.
Gun...
30-06 brass fire formed to 25/06 AI?
Fired and put away dirty?
Chemicals left from firing may attack the brass over years, if not cleaned before storage?
A variable 12x42 would be my choice. 36x is better then 18x.
Old thread warning.
Military thinks there is about 23,000 PSI in the pocket. No powder in case. #41 primer.
Photo , no flash hole 30-06
...
Bedding in front of the recoil lug may act as a wedge? The barrels weight becomes the lever. This may increase force on the action?
How the barrel is bedded may make a difference?
1.Barrel, ...
You can not use a Redding full length bushing die to do the resizing, before neck turning.
My 243 win bushing does not size all the way to the shoulder.
I seem to get longer case neck life...
Back in the 70s, the Rem 40x had a 2 oz trigger and the standard one available. I dont know what makes them different or special?
My 40x 243 Win. has standard. The 2oz i handled would not...
Pressure and velocity SAAMI standards.
The Giulio Fiocchi, Lecco, Italy brass may have a different volume then Hornady brass?
With harder bolt lift, there should be other signs, not just one.
Velocity at 3774 fps/24" barrel, is ...
http://benchrest.com/showthread.php?98706-Neck-Tension
See chart Post 6
Another interesting result was that while we were shooting the thicker jacketed bullets both barrels produced several blown primers. The .257 barrel produced 14 blown primers and the .256 barrel...
If the neck expands .002" after seating a bulllet in 223 , bullet pull is around 35 to 45 pounds by my testing. The attachment was on the internet.
Have a look here. https://ammoseek.com Or maybe here. https://www.gunbroker.comThey wont be cheap.