Search:

After our final match Sunday, Dwayne Pullum bested the field over Five Matches to emerge as Tomball Gun Club’s VFS Shooter of the year.

Congratulations to Dwayne over a very successful shooting...

Is it a cut rifled barrel or a button rifled barrel.? The rumor has been that buttoned barrels will actually expend a very small amount when metal is removed, and cut rifled do not. I really can’t...

We had a great, if not hot day to shoot our final Match of the year at Tomball.

Ed Bernabeo came out on top with a 250 22x. There was a three way tie for 2d, with Alan Krenek winning the tie...

And congratulations to Harley Baker, Eddie Harris, Jeff Summers, Ray Porter, and Wayne Campbell for their winning efforts.

http://benchrest.com/attachment.php?attachmentid=25544&d=1655086081&thumb=1&stc=1

Since it seemed to be hot and windy everywhere as of late, South West Louisiana is no different.

The South Aest Louisiana Rifle and Pistol Club hosted the Gulf Coast Region Varmint for Score...

What you are describing happens on a daily basis in shipyards throughout the world.

Prop damage is an ongoing problem in any boat. Inland Push Boats are particularly hard on them.

When a vessel...

https://forum.accurateshooter.com/threads/for-lack-of-some-rubber-the-king-was-lost-big-repair-job-for-our-shop.4066213/

The link has several pictures and explanations. Just click on it.

I never really fooled around with Graph/Mo. I can see the hardening capability with that 1.45% carbon.

I wonder if, like leaded steels, they actually add the graphite as the steel is poured from...

Randy, back before I started making my own 30’s, when I did quite well with yours, I always seemed to shoot the best Aggs with your 112 on the .925.

But then I think about the lesson you gave us...

George, I did not realize they were that hard. That is right up there with most High Speed Steels.

^^^^^^^
The distance you shoot a 30 BR at means using the most accurate bullet/Barrel/powder combo as possible.

Day in and day out that’s a relative straight shank bullet at 7 to 8 ogive out of a...

Dave, that’s about what I have heard. Some say hat the Eubers made up to 3 million on that famous 6 mm die of theirs.
I remember talking to Allie at Phoenix a few years before he past away, and he...

Randy, we all know that for the past years Al has been chasing a NHRA Stock Car Index, where they measure gains in .001 of a second increments down the track.

So he thought he would get back into...

Al, are the Blackmon dies Carbide or Tool Steel.

Just curious.

Those bullets look great. I am locked into a .925 jacket bullet because I have tons of jackets and my bullet has a nice long...

Especially when they shoot well:cool:

What are the particulars on your new die?

Thanks Wayne.

By the way, folks, this was Scott’s first Two Gun Championship.

I feel confident in saying it will not be his last.

I had a thoroughly good time this week end. Granted, there was a few times...

Leaded steels are simply steels that have lead added at at the pour. The lead literally gets between the individual molecules of the parent metal. This is what gives these steels their free machining...

http://benchrest.com/attachment.php?attachmentid=25455&d=1651456333&thumb=1&stc=1

Well, todays weather kinda started out decent, but by the 3d Match at 200, it was pretty obvious we were all in for a full day of “lamentations and nashing of teeth” ;)

I doubt any shooter didn’t...

One word.

Wind. Lots of it.

Here are the 100 yard day one results.

http://benchrest.com/attachment.php?attachmentid=25449&d=1651374742&thumb=1&stc=1
...

They are predicting wind. And more wind.:p

But it will be fun.

:eek:

The darn stuff machines so well that sometimes just turning on the lathe will cause shavings to fly

It does case harden just fine.

Just don’t try to weld it and expect things to hold...

Dietz Range north of New Braunfels.

https://www.dietzgunshop.com/