Search:

Stuart, you're welcome. I was remiss in not also mentioning Jim Peightal as he build excellent stocks as well.
If 6oz is all you need to loose you might considr a Leopold BR 36, the lightest I know...

I picked up a stock from John a couple years ago & really like it. I've not seen him post anything here But if you go to Accurate Shooter site he can be found. He make them in various species of...

I've never noticed that drastic with rf. I'm going to have to pay more attention I guess. Its my understanding that its best to be tuned at the top of the wave opposed to the bottom.
Mike, any idea...

I'd be interested in your findings once you get a chance. Having said that didn't you just send a gun or 2 to the Lapua test center? I'm assuming you found a lot or 2 to buy meaning it shot pretty...

Tim, I've never seen any major difference other than a click or 2. But then I'm apt to do that any given Sunday so....
Is that what you've found?

Data? No, I don't have any data. When I said twisting what I meant was willing to move it. I have a base tune I'm comfortable with for example. At the beginning of a target when shooting sighters if...

I'm guessing the flattish one's are where your best groups are? That's what I think I'd stick with as it would seem that is your "window".
Another thing I would look at on your perceived best...

A trap I fall into is being to relaxed when shooting at my home range. I'm too relaxed & my concentration suffers. Often times I'm not shooting my "main" rifles or ammo, experimenting with this or...

I've heard of somebody shooting a 250-0x once. That's gotta be extremely hard to do! Probably equally as hard a 250-25x.
I think I'll try this summer :)

Keith

Is a post chamber lap same as "finishing" a chamber?
A little embarrasing but never having done one or knowing how to attack it I thru a stub in the lathe, reamed it, wrapped some emery paper around...

Tim, I made one today & checked some of the few lots I have. One of my best lots of Eley was on the long side compared to others I had by as you mentioned, about .010. Same with some decent shooting...

As it turns out mine wasn't bored deep enough. It looks like mine is engraving .050+/-. My apologies if this caused any inconvenience.

Keith

I think Joe Chacon makes them.
You can find them here https://04459f5.netsolstores.com/jnlprxiiituner.aspx

Keith

Tony, I've watched the video a couple times & fail to see where it dispels any myths. I saw where he found the engraving on the 2 barrels.
Furthermore, & I don't mean to discredit the guy, but his...

Tim, you've hit the nail on the head in regards to me. I can't tell you how many times I've shot a dozen sighters before going to a record bull, including the sighter next to it, ALL 10's or X's, &...

Good hearing from you Ray! Are you still doing the rest mount spotting scope stands as well?
I see there are some copies of your flags out there & thats likely where the questions came from. Pretty...

I'd read about it over on RA but think its awaiting approval from Jason.
In any case,...again:rolleyes: Great Shooting Bruce!

I agree with Tad & Kevin here in that it was probably done to get the O.D. concentric with the bore in hopes that when the tuner was mounted the I.D. would also be concentric with the bore.
I...

Should have mentioned mine is the factory barrel too. .930 straight until the swell out at the muzzle thats 1.010

Butch, I have 1913 w/ mid barrel tuner & Harrell's. Its set on 152. Not sure we have the same contours though.

Keith

Check with Mike Ezell. Otherwise maybe have a local machine shop make an adapter.

Keith

I tend to think crown placement is more important than the chamber itself.
When I did my 1st barrel years ago I didn't like how it shot out the gate. I'd bought 3 different reamers so I cut the...

While the barreled action is in the lathe I put an indicator on the back of the bolt with the fp resting on the case with a pulled bullet & dumped powder of course. My zero will be ,200. Cock the...

Thank you Kevin for chiming in! Much appreciated. I’ve always appreciated your willingness to share.
Thanks
Keith

Tony, look at George's post in the ARA National thread. There is a print of the reamer. I did not have one or know what it called for. All I knew was what I had read that he preferred .030 engraving....