Search:

some talk over on the gunsmith forum.
alex wheeler lrb stock
borden brmxd drop port
krieger 1/8 237 28" chambered by gary o'cock my dasher reamer
jewell br trigger
nf 15-55x comp in burris...

yes i started with 1/2" and then opened a little.
after live fire testing will seal it all.

i found pics of funnels...NONE IN STOCK
and cut based on the internal shape of those funnels
my action now drops a dasher case out the bottom.
some clean up and cosmetic work to do.

se there is an advantage to a 67 vw...no electronics.....
as far as scrubbing use body temp water to prevent skin pores from closing on debris.
twinkies rule

so this is a 6mm dasher drop port, borden brmxd .
so how big is the outlet in the bottom of the stock ?
just copy the action port
bigger than the port, how so ?
smaller than the action port ??
...

brownells sells small plastic jars in various grits

It was a practical session in the psychology class. The professor showed a large cage with a male rat in it.

The rat was in the middle of the cage.

Then, the professor put a piece of cake on...

ya need to chamfer the case necks and they are probably too small, and too hard

so i did as i said, i lined up the 2 stocks as best i could and drilled two 257 holes.
i then took the new stock and laid out a center line. it shows the forward hole is off about 0.010.
easily...

so thanks for all the input. it appears that if i want to shoot this rifle this year(nationals in sept), i need to do it myself.
i have spent time this week prepping brass for fire form, and at the...

but just as you profess support, i am allowed the opposite when it is true.



now to see if you can let it go

the pillars in the old stock have an F hole(257).
the pillars are my drill bushings

but to be real clear if they quit making it yesterday,and you want it inlet tommorrow too bad..
and not a new customer a long time repeat customer...but no longer

so, i have one inlet stock, fully bedded to the same basic action.
i think this provides a tool to guide the location of the action screws.
once those 2 holes are in place i have ref points for...

and in this case i disagree with yours.
opinion or not inletting has been part of their day to day biz...until now
moving on

i have a masterclass stock as well..bought from alex.
but i think he has gone to wood only...and then there is the distance...he aint close.

thanks

well there is always two sides to a story
i am local to mcm, and they have inlet several of their stocks for me.
BUT
I BOUGHT A WHEELER/MCMILLIAN LRB STOCK AND MCM WILL NOT INLET IT.
they stopped...

I CAN do a pattern/layout based on the first stock,
remove a ton of material with just down cuts
my big concern is getting it all straight/inline with the stock

hmmmmmmmmmmmmmmmmm
if you look in the back..it clearly says the brand that was listed....the building in the back is a generator...for the charging station for the ev\s

so i have a mcmillian.wheeler lrb stock that has no inletting.
mcmillian has done them in the past but now refuses.
neither of my 2 local gunsmiths will do the inletting
the good news is i own an...

you are backwards thinking to the CURRENT process used in br.
fl sizing with a shoulder bump of 1-2...now the fl is also slight

for both
wilson makes decent threaded press dies and the harrell's...

methinksnot

you are mean and evil!

a benchrest rifle or ???
i shoot 600/1000 benchrest in nbrsa and ibs,
and 2000 yd group/score at 2000 with a 338 edge...sorta min for the class.
the winners are at 11-12" and pretty much in the...

yep what he said