Search:

I was wondering the same thing he asked? Will you post the solution? Thanks

You are welcome.
I was having the same problem and dreaded boxing my unit up and sending it back. I lucked into the thread directing me to these. They work. I would use them even if I did not have...

Or you can get this:
https://www.amazon.com/CAFELE-Magnetic-Universal-Compatible-Micro-USB/dp/B07Y1PMGC5/ref=mp_s_a_1_4?dchild=1&keywords=cafele+mini+usb+magnetic&qid=1590244742&sr=8-4

My port...

Why do you say the 6bra better.

Ok. I’ll play. What is better and why. Keep in mind, I have two new Dasher barrels so you are going to disappoint me. :(

I find this interesting. From what I have seen, there are different issues shooting 100/200 group and 600/1000. Es/sd at 100 can easily be 30+ and still shoot in the .1s. Wouldn’t that same 30+ would...

Just testing I have sized with a button and then opened the necks up with a mandrel. Compared to just using the button I was consistently getting single digit Es when using the mandrel with the...

I have used quite a bit of the Norma 6ppc. brass. What I found is that the shoulder is set back quite a bit so the first firing I was fireforming to my chamber. The neck length may also need to be...

Don’t matter how good the gun is-you have to learn to make excellent ammo and to read the wind. Those are the more difficult task at hand; especially the latter.

You know the old saying “I’d rather have it and not need it, than need it and not have it.”
Sounds like you know you will need it. No fun shooting the wrong gun. At least for me. I’m bad enough...

Now that is informative for several reasons. How much do you cut off when rechambering?
Thanks

Congrats. What were the conditions?

Mram, I hear you. You failed to see that Bruce Pearl is about as lose and close to crazy as any D1 coach, and his players have totally bought in and drunk the koolade. He tells them to keep shooting,...

I am a Bama grad. Unfortunately, my oldest son attends Auburn. Due to my investment, I am pulling for Auburn. You had to know they were going to beat Kentucky if you have been watching Auburn play. I...

Nice. How do you convert to a drop port? Is it difficult to do?

.436 at 200
1.081 base to shoulder

OAL 1.503-1.507 (I measured several)

The shoulder on the Norma brass is set back appx .007 further than my 6ppc chamber. Takes a couple of firings to blow them out. The necks are appx .265. If you need it, I will measure and give you...

I think they shoot at Brock’s Gap also.
http://www.brocksgap.com

What STP product?

Not on sale now. Listed for $1088.00.

Thanks for posting.

Congrats guys! Do us proud.

Thanks Mike. What is the prescribed width to turn down to now? I have read from 86 to 81.

Thanks Rick. Right now I do not have a ff barrel so .243 it will be.

So, for a 262 neck do you size the neck up to 6 mm and then use 6mm bullets or do you use .22 cal bullets?