rsmithsr
Registered User

we only differ on the definition of slam fire, after bolt lug engagement is not a slam in my opinion. i try not to argue with asa.

if i had some i would, but i fixed all of it with a crimp removal tool. no there was no crimp, but an extra lip at the mouth of the pocket, it...

consider doing the opposite. leave the 45 but shorten the gap from neck to gap to 5-7 thou. flame never sees the 45..just blows on by...maybe

what rifle ? an ar10 cannot slam fire..the geometry of the system prevents the firing pin from moving forward til the bolt turns(lugs engaged) stop...

end of neck dia and end of chamber are two diff numbers. and only the neck number is truely useful. are you saying end of chamber is begining of...

start working on replacing board/commitee members

yes but..the case is never suppose to be there. go with neck dia and have the tool stop at the begining of the transition

i use long brass in my 30br, fire formed not expanded. it can produce brass lengths into the neck throat transition.that is the number seen above ...

today is last day of practice, dinner at the range tonight, then the crying begins.

try gary ocock or lester bruno,

an entry level bolt action, which was available as single or mag fed, one of the regulars here bought one and built a rifle on one...cannot remember...

YES..the threads need to be square to the bore. often the brake is then line bored in place for desired clearence

Spam alert.....go away

YA JUST NEED TO KEEP YOUR EYES OPEN( computer links to known sources) i have both and shoot both depending on temp ( lt30 and 4198)

yes well the fact is, HE AINT GLASS BEDDING ANYTHING. GLASS is short for fibre glass...a cloth used in building. thinks like boats, cars fishing...