Page 4 of 4 FirstFirst ... 234
Results 46 to 51 of 51

Thread: Pillar to action mating surfaces

  1. #46
    Join Date
    Feb 2003
    Location
    Lower Dakota Territory
    Posts
    1,849
    Here's a better look at the guide pin/sleeve used:


  2. #47
    Join Date
    Feb 2004
    Location
    Williamson County, Texas
    Posts
    291
    Al,

    I like your system, thank you for sharing. I am about to bed a 700 SA into a H&S BDL stock for hunting, I will try to copy your system on this one.

    Do you see any drawback in using your system on a BDL bottom metal?

    Nez

  3. #48
    Join Date
    Feb 2003
    Location
    Lower Dakota Territory
    Posts
    1,849
    Nez, it works great on the HS aluminum bedding blocks. On those, I epoxy the sleeve in from the bottom and let it set up. When doing the clean up after removing the action, a quick pass with a 5/16 drill bit spins 'em right out. Bedding the BDL bottom metal to the pillars is important also as it's never flat.

    Looking forward to hearing your results. -Al
    Last edited by Al Nyhus; 01-30-2020 at 07:31 AM.

  4. #49
    Join Date
    Feb 2004
    Location
    Williamson County, Texas
    Posts
    291
    Quote Originally Posted by Al Nyhus View Post
    Nez, it works great on the HS aluminum bedding blocks. On those, I epoxy the sleeve in from the bottom and let it set up. When doing the clean up after removing the action, A quick pass with a 5/16 drill bit spins 'em right out. Bedding the BDL bottom metal to the pillars is important also as it's never flat.

    Looking forward to hearing your results. -Al
    Al,

    Thank you for responding.

    Nez

  5. #50
    Join Date
    Feb 2003
    Location
    Lower Dakota Territory
    Posts
    1,849
    Quote Originally Posted by NezRongero View Post
    Al, Thank you for responding. Nez
    Sure thing, sir.

    I'm about to start a new gun project myself and it will need some thought on the bedding. Maybe I'll take some pics along the way and document the process. -Al

  6. #51
    Join Date
    Feb 2003
    Location
    Poetry, Tex.
    Posts
    6,544
    Quote Originally Posted by Al Nyhus View Post
    Sure thing, sir.

    I'm about to start a new gun project myself and it will need some thought on the bedding. Maybe I'll take some pics along the way and document the process. -Al
    That will be great Al.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •