Search:

I have one with .330 neck won't need....don't recall FB. $100 shipped lower 48.

Thanks for the feedback.

I screwed up and forgot to change the tool angle from 25 deg back to 29.5 deg before I cut the threads. The action fits up tight in the same way but I am curious about the strength of this...

Is it legal to send a reamer to Australia?

I have a 2011 Panda that I want to get a different bolt for. Does an early 1989 vintage bolt fit?

I bought an old school 40X br gun in 222 and have had a lot of fun shooting it. Finally able to shoot in 1's for first time in my life but the thing really fouls quickly. A good cleaning and...

I started coating when Merril Martin introduced it to the schuetzen game back in early 80's. He and Johnson sold a kit that I won at one of the fests in Golden. Merril was also into heat treating...

Thanks to all,

It is interesting that the same powders that work well in a 308 are good in the deuce. Looking forward to shooting this gun...I also got a bunch of Rem 52g BR bullets. I am...

I acquired a 'classic' Hart benchrest rifle and am curious about the old load for this round. I tried to search/FAQ but didn't find anything.
thanks in advance,
Lige

I can call them next week but thought I would ask here first. My 3Lug Long bolt handle is getting loose. Not sure how it is attached? If you know how to tighten this thing let me know.
thanks in...

I am considering a 32" 30cal 1-10 Lilja HV bbl. He has limited groove offerings for the long bbls. Either 3 or 6 grooves. Does anyone have any experiences they could share with Lilja 3 or 6 groover...

Leupold Competition 35X......COST ME POINTS at the FCNats last week. Shooting F/TR 308 with 175g BTLR's. On the 12th shot of first match (calm) I was clean with 5X's. 13th shot was 8 at 12:00. 14th...

Does the 6CM have the same headspace as the 243W? Can I use a 243/308 Go in chambering the 6CM?

tia,
-lige

seller lists 8.75-8.3 twist. Has anyone tried these? Will they stabilize 107-105g bullets out to 600?

thanks in advance,
-lige

I finally got in touch with Wally Hart. He said he made that action for his dad. Wally said that the action body is threaded and the sleeve is screwed to it and holds the recoil lug in place. Now, if...

The sleeve covers the bbl ahead of the recoil lug. I will contact Hart and find out what I can and post here. If any of you have an original stock for this vintage BR rifle please get back to me. I...

I acquired an old heavy 1.75" SN#3xx Hart action with the 6" sleeve ahead of the recoil lug. I didn't want to force things without asking if someone knew how the sleeve was attached....will it simply...

Jim says he has just what I want....thanks -lige

I have need for a trigger guard just like the BR model McMillan no longer carries :( (no hole in front of guard) . My BAT action with the Anschutz trigger does not utilize the rear action screw and...

Yes, rebed it with Devcon. This rifle is inherently accurate and was used by the best of the smallbore shooters...pre-Anschutz days. I have two, a full Kenyon with McM bbl and the one attached that I...

I just completed this task and followed the suggestion from another thread in this forum to chamber it .004 short. This worked great. Fireforming was very accurate too...no separate bbl needed for...

Hi Clarence,
Thanks for your input. I am pretty much set on headspacing with std gage and setting back .006 plus making sure my brass (new Lapua) will be tight. Can also make my dies shorter if...

Thanks for the feedback. I think I will learn a lot from this project. -lige

I was told that the AI versions (hopefully the 243 40 degree version is the same as the 243 AI) uses the same headspace gage as the standard version of the ctg. Sorry if this is redundant..I didn't...