Search:

JB is way too fine. I use Clover 220 grit on an Iosso plastic brush.

I use 25 foot pounds.

the top one is the more centered plug with the ten ring

Here are pictures of 10 shot groups, shot with 2 new barrels that Jerry Stiller lapped and I chambered and cut to a very specific length. I think the lapping is critical on how well a barrel will...

The first one is what I have.

If you have cabin fever, we will have our ARA tournaments at Boerne TX this weekend, Friday and Saturday evenings at 7 PM. $40 for one or $60 for both. Joe Chacon has received the OK from the county...

Well maybe he has a really crooked lathe alignment. I haven't seen throat misalignment's near that bad that he is talking about. 2-3 thousandths would be pretty bad in my opinion. The chamber throat...

i built 9 total. 6 are in use. 1 disappeared after the owner passed. There are 2 left. These 9 are all prototypes that have the same general design features with a small evolution in some features....

I believe this is the only pure joystick ,1 piece rest design, in existence designed for RF. It travels pretty close to true either horizontally or vertical.
23357

I built them.

This is what I use.

2 popular engraving depths are .090 or .030. This would be .130 or .070 measured from the back of the barrel to the back of the rim.

TX NM state line.

I will have at least 3 available at the ARA nats this year for you to try. I will be there 8/28 to 9/1. Price will depend on version and options $1750-$2400.

"Hobbing" by itself does not address the issue completely. There is the cutting swarf as well as any radial gouges that often do not show up with a borescope examination.

I will not discuss the exact methods due to the likelihood of the inexperienced damaging a carefully chambered job. This is something you would discuss with your gunsmith. Be advised that many...

I don't know about that expert you are referring to. The CF barrel throat has the same issues as a RF, but will take care of itself with the shoot 1 shot and clean procedure. When a RF finishing...

A rimfire doesn't have the heat and pressure to burn/polish out the throat. A rimfire throat has to have this done after chambering by mechanical means by the gunsmith. They have their own ways of...

While it is currently out of stock but you are probably looking for something like this.
https://www.killoughshootingsports.com/index.php/rests/abra.html

LOL, I don't think I ever sold one for $500. That would cover materials. There are about 60 parts that I make for this one. Needless to say, I don't sell many. About one a year.

R. Parker uses a Farley and says it will not cover an IR50 target at 50 yards without a course elevation adjustment during the target. A. Taylor uses a Seb and says it will cover an IR50 target...

Like all things BR. Price, outrageous, availability, unobtainium. I built this for my wife as she is a new shooter and has trouble coordinating everything in a timely matter. She has an easier time...

That thing was easy. This was much more challenging. The world's first convertible standard/joystick one piece rest. Takes about 5 minutes to convert from one to other and it can set for right or...

The body is .695 diameter to slip inside of the receiver. It is bored to slip over the reamer and held by a set screw. The body is threaded 40tpi with a set of collars to lock the setting. One collar...

I made this adjustable reamer stop for adjusting the engraving length while at the range without taking the gun apart.
21693