Price for this service is $425.00 plus postage. We will
Rockwell check your action and if found not suitable, advise you before
starting work. We will supply you with a barrel of your choice of size from
our standard shapes FWT through Benchrester. The barrel will be of our chrome
moly air gaged, premium quality. Barrel will be fit, headspaced and proof tested
in those calibers where proof cartridges are available. If proof cartridge is
not available, we will fire a new factory cartridge or hand load assembled
into new brass to maximum loads. Every effort will be made to assure highest
quality material and workmanship. Barrels will be supplied in the white - NO
BLUING. All barrels fit in our shop will be branded with caliber, G. R.
DOUGLAS and XX premium grade stamp. Add $20.00 for .17 caliber. Stainless $68.00 extra.
ADD $68.00 FOR STAINLESS
BARREL FITTING SERVICES
We will fit barrels to SUITABLE
Should your action require that
the bolt face be opened to accept magnum head diameter cartridges, there will
be an additional $25.00 charge. WE DO NOT INSTALL SIGHTS OR MAKE ALTERATIONS
TO THE MAGAZINE to insure the cartridge feeding. This is your responsibility.
Should you wish an old barrel to be duplicated, we can probably do this for
you, depending on barrel shape wished. Price is $50.00 additional.
We cannot guarantee we will not scratch the blue on
your action. Every effort is made to prevent this, but it sometimes happens.
2 or 3 wet patches with a good bore cleaner through the barrel. Then use a
brass brush and wet patch again. When sighting in, clean every 10-15 shots.
Always leave cleaner in bore when you are finished shooting. This will
dissolve fouling left in barrel. The barrel should be thoroughly dried before
shooting. If Sweets is used, do not leave in barrel more than 5
minutes. Do not mix Sweets with any other cleaner.
Do not use stainless
steel brushes or abrasive cleaners in barrel.